How to Flatten a Persimmon Driver

Re: How to Flatten a Persimmon Driver

Postby daleheck » Wed Apr 17, 2013 8:38 pm

Nice going Newton!
Pretty satisfying stuff working on your own gear isn't it !!
I have a Power Bilt and a Palmer Peerless that I re- built that are close to you clubs' stats;
love playing and practicing with them!

Best of Luck with your new weapon!
Dale
User avatar
daleheck
 
Posts: 233
Joined: Tue Apr 03, 2012 10:42 pm
Location: Southern ,CA.

Re: How to Flatten a Persimmon Driver

Postby bullrambler » Sat May 17, 2014 8:17 am

I've got a ways to go before I do this, but I'm going to start with a M85 four wood as the first project.
"It clobbering Time"
bullrambler
 
Posts: 48
Joined: Thu May 15, 2014 5:07 am
Location: Central Ontario

Re: How to Flatten a Persimmon Driver

Postby Mashie72 » Fri Feb 19, 2016 1:11 pm

Thread Bump for K2
"The secret is on the deck"
User avatar
Mashie72
 
Posts: 971
Joined: Wed Jun 24, 2009 5:42 am

Re: How to Flatten a Persimmon Driver

Postby k2baloo » Mon Jul 10, 2017 4:32 pm

Lag

Thanks for putting this together. I'm starting some work on some eye o matics, but they have really skinny necks.
Will it even be possible to flatten them out??

In the end I have some Spaldings I want to customize, but want to get a couple practice projects under my belt first.

Thanks
k2baloo
 
Posts: 784
Joined: Wed May 15, 2013 5:43 pm

Re: How to Flatten a Persimmon Driver

Postby NRG » Thu Jul 13, 2017 2:25 pm

When you cut off the top of the neck it will be wider, you might just need to cut it a bit lower down.
User avatar
NRG
 
Posts: 1078
Joined: Mon Oct 19, 2009 12:19 pm

Re: How to Flatten a Persimmon Driver

Postby paradigm_shift » Tue Oct 03, 2017 7:41 am

Not sure if this was covered or not?

For you clubmaker experts....will I encounter problems if I drill into a laminate or should it be fine?
paradigm_shift
 
Posts: 28
Joined: Sun Apr 16, 2017 6:32 am

Previous

Return to Top Threads (2000 Club)

Who is online

Users browsing this forum: No registered users and 1 guest