Hogan 93 Apex, afraid to bend ?

Hogan 93 Apex, afraid to bend ?

Postby daleheck » Sun Jun 17, 2012 10:30 pm

Hello All,
I have a nice set of 93' apex (single red line to left of Hogan Sig, ) I thought they were at 3 deg. flat.. turns out they are 1deg.. flat..I want them at 4 deg. to 5 deg.
Anyhow, the guy that has bent my Mizuno's and Muirfield's wont touch them,, says danger of breaking the pin that runs thru the hosel/shaft end.. anyone have any experience with this?

thanks
daleheck
User avatar
daleheck
 
Posts: 233
Joined: Tue Apr 03, 2012 10:42 pm
Location: Southern ,CA.

Re: Hogan 93 Apex, afraid to bend ?

Postby ocat1979 » Sun Jun 17, 2012 11:19 pm

Dont why he's worried about the pin, the club bends near the bottom of the hosel, the pin is up the top of the hosel. They are your clubs, not his, if he doesn't want to do it I'd find another guy.
Don't practice hitting golf balls, instead practice hitting golf shots
User avatar
ocat1979
 
Posts: 78
Joined: Fri Dec 30, 2011 4:39 pm
Location: Victoria, Australia

Re: Hogan 93 Apex, afraid to bend ?

Postby daleheck » Mon Jun 18, 2012 11:03 am

Thanks for the feed back,, I'll do just that..

daleheck
User avatar
daleheck
 
Posts: 233
Joined: Tue Apr 03, 2012 10:42 pm
Location: Southern ,CA.

Re: Hogan 93 Apex, afraid to bend ?

Postby bentshaft » Mon Jun 18, 2012 11:10 am

I cannot tell you how many pinned Hogan clubs Hoganut and I have had bent, but it is A LOT!!

Several sets at least and have never had a problem---I think he is 7 degrees flat right now---Bend away!!

bent
bentshaft
 
Posts: 246
Joined: Sun Jul 05, 2009 9:42 am

Re: Hogan 93 Apex, afraid to bend ?

Postby daleheck » Mon Jun 18, 2012 4:11 pm

Thanks Guys!

I need to build an arsenal of equip. close to ABS specs so I can prepare to wear them out!

thanks again
daleheck
User avatar
daleheck
 
Posts: 233
Joined: Tue Apr 03, 2012 10:42 pm
Location: Southern ,CA.

Re: Hogan 93 Apex, afraid to bend ?

Postby lagpressure » Mon Jun 18, 2012 6:54 pm

Those are a nice set.
You should be fine. Bend away. If you were to break one, that would not be a hard set to find a replacement for.
User avatar
lagpressure
Site Admin
 
Posts: 7987
Joined: Thu Jun 04, 2009 12:50 pm

Re: Hogan 93 Apex, afraid to bend ?

Postby daleheck » Mon Jun 18, 2012 8:26 pm

Thanks Lag,
So far though between the Apex, Mizuno Mp14 (too much offset?) the Macgregor Muirfields feel and suit my eye the best ..
I am ebay sniping a nice set of Wilson Fg 17's( circa 1983 ?) and I think that will do me for a while..
May need to send those if I snag them to you guys for ABS set up...need to pay for and get started on mod 1-3 1st...
BTW,, did you get my questionairre yet?

regards
daleheck
User avatar
daleheck
 
Posts: 233
Joined: Tue Apr 03, 2012 10:42 pm
Location: Southern ,CA.


Return to Club Repair and ABS alterations

Who is online

Users browsing this forum: No registered users and 1 guest