Grips

Grips

Postby LCGEEK » Wed Aug 22, 2012 7:55 pm

Hi All, I am new to the site and just getting up to speed on all the ABS stuff. Great site.

Quick question on grips - do most of you vintage iron players stick with vintage grips or do you play a more modern grip? I just picked up a set of ABS spec'd irons with what looks like original grips, although I have no idea really. The grips seem super hard and not very grippy :) Just wondering what most folks go for.
Thanks!
JT
LCGEEK
 
Posts: 32
Joined: Tue Aug 14, 2012 8:45 pm

Re: Grips

Postby jrich99 » Wed Aug 22, 2012 8:11 pm

I like Lamkin Crossline cords a lot. You can get them dirt cheap from time to time on golfsmith's website when they're having the blemished ones on sale.
User avatar
jrich99
 
Posts: 627
Joined: Wed Feb 23, 2011 7:34 pm

Re: Grips

Postby lagpressure » Wed Aug 22, 2012 8:58 pm

Cord grips... Leather grips are all good ways to go. Sometimes we find vintage Green Victory which were the popular choice on tour back in the 70s and 80's. They are still great grips.

Forget soft or spongy grips. You want as much feel and feelback from the strike as possible. Anything cushioning or mushy hinders your improvement.

Think of the tight suspension on a race car compared to the soft spongy ride of a Cadillac. Comfort maybe, but performance hindering.
User avatar
lagpressure
Site Admin
 
Posts: 8175
Joined: Thu Jun 04, 2009 12:50 pm

Re: Grips

Postby Richie3Jack » Thu Aug 23, 2012 6:58 am

GripMaster USA has leather grips. They are not cheap, usually going for at least $19 a pop.

I have a set of them at home, but I prefer a slightly smaller grip even though I have big hands. I use an air compressor to install grips, so even though I don't quite like them, the grips can be re-installed and re-used.

Since I live in Orlando, I need grips built for humidity. The humidity causes sweat and in the summer, it practically pours almost once a day. I've found that the GripMaster grips are the best to deal with the sweat. Then the Iomic grips (which I currently use at $17 a pop).





3JACK
Richie3Jack
 
Posts: 656
Joined: Sat Dec 05, 2009 10:20 am

Re: Grips

Postby nfbandon » Thu Aug 23, 2012 7:40 am

I use the football style leather grips from bestgrips. They are expensive as well. Generally happy with them. Very firm and good tack, but in humidity they can still get a bit slick. They are really built to last, however, and the feel is very good. If you go on a golf trip, which I recently did, however, your hands will hurt by the third day. I got mine on the old fashioned way, but blew out one with the driver. Air would be better.
nfbandon
 
Posts: 1072
Joined: Thu Dec 16, 2010 1:03 pm

Re: Grips

Postby LCGEEK » Thu Aug 23, 2012 9:05 am

Thanks guys. I like the feel of a firm grip so was not planning on going mushy :) I just wanted to make sure I was not being a wuss by peeling off the 50 year old petrified rubber and cork grips that are on now.

JT
LCGEEK
 
Posts: 32
Joined: Tue Aug 14, 2012 8:45 pm

Re: Grips

Postby Ironsmith » Thu Aug 23, 2012 9:19 am

LCGEEK wrote:Thanks guys. I like the feel of a firm grip so was not planning on going mushy :) I just wanted to make sure I was not being a wuss by peeling off the 50 year old petrified rubber and cork grips that are on now.

JT



Yeah, grips are a wear item just like tires for your car. You don't have the same worn out factory tires on yer '57 Chevy do you? Nobody would call you a wuss if you wanted to be able to drive yer '57 Chevy without bald/flat tires. Now you may want to get grips that were similar in style to the originals, if possible, just from a nostalgia point of view.

If you are playing your clubs as opposed to having them sit in a display case, then replacing them is common. I usually replace my grips every year. It really depends on how much you play/practice. They might not look that worn, but dirt and oil build up in them. If you get them on sale and in bulk and don't go for the fancy brands you can get them for about $2 a grip. If you have an air compressor, it will literally take you seconds to remove/replace the grips.

Some people get excited about getting 40+ year old clubs with the original grips (WOOT!). I'm not sure why they would get that excited unless they are a collector. Just dry rot and age alone will render those grips almost useless.
Ironsmith
 
Posts: 155
Joined: Thu Jan 19, 2012 9:17 am

Re: Grips

Postby Range Rat » Thu Jun 13, 2013 6:07 pm

Was reading about 'cost cutting measures' on the other thread about laminates v. persimmon and had a first today that was an eye-opener and related under a cost cutting context.

Some dude brings in an old Taylor made driver today, didn't pay much attention to year/make, as he just wanted a new grip on it. It was a frying pan maybe 5-6 years old. Anyhoo, the grip looked fine to me, and I told him the cords look fine but the grip is quite filthy and just needed to be cleaned good. Didn't have much to do at the time so I told him I would clean it up for him and it could air dry outside and he could use it fairly soon into his bucket of balls.

Rat goes into his routine....liberal dousing with Simple Green full strength, stiff bristle finger nail brush scrub, warm water,....start scrubbing that sucker and......THE FRICKEN CORDS COMES OFF! :shock: It was some kind of cordy mesh that was glued on top of the rubber after I looked more closely, you could even see the seam on the backside. WTF Taylor Made....are you too freakin' cheap, and/or stupid, not to embed the cord into the rubber. :lol:

One of those days I guess.
You're ahead of where you were, and behind where you're going.
User avatar
Range Rat
 
Posts: 2359
Joined: Fri Jan 01, 2010 8:30 am

Re: Grips

Postby SteelArcher » Mon Jun 17, 2013 10:49 pm

I've used the Golf Pride BCT cords for a long time, pretty soft, but great feel and traction. I recently bought some used persimmons with leather grips and wow.... they slip so easily.

Speaking of the grips... does anyone know if anyone's making some extra long grips? If you look at some old Hogan footage and noticed that his grips (in some cases) were at least 1.5x longer than anything I ever used... I could see them coming in great handy when playing shots choked up. Often, I find that I'm gripping down to the metal to hit certain shots.
SteelArcher
 
Posts: 14
Joined: Thu Feb 07, 2013 8:34 pm

Re: Grips

Postby xsmith » Thu Aug 29, 2013 7:26 am

Anyone have any experience using Mint Grips? Thought I may try them since they're so economical. Interesting note, my set of '73 Wilson blades has what looks to be the original set of Lamkin Sure Tac Classic grips that are still viable. They offgas like crazy though. Shafts are also bad.
xsmith
 
Posts: 39
Joined: Fri Jul 12, 2013 9:18 am
Location: OKC

Next

Return to Equipment

Who is online

Users browsing this forum: No registered users and 2 guests