Cracked Forged Iron Head

Cracked Forged Iron Head

Postby grux » Mon Apr 15, 2013 9:19 am

Unfortunately the neck of my 58 wilson dyna power 8 iron has a half way through the neck. Is the club junk or can it be fixed? I would get another set but it is difficult finding 58 left handed dyan powers. :roll:
grux
 
Posts: 74
Joined: Tue Mar 08, 2011 8:34 am

Re: Cracked Forged Iron Head

Postby lagpressure » Mon Apr 15, 2013 11:30 am

http://www.ebay.com/itm/LH-VINTAGE-WILS ... 2306eece0a

Here is a 65 Dyna 9 iron you could bend into an 8 iron easy enough... at least in the meantime till you find the 58 LH. The LH ones are out there.. just have to be patient. Check

http://ironfinder.com

from time to time... although I didn't see one on there today...
User avatar
lagpressure
Site Admin
 
Posts: 8175
Joined: Thu Jun 04, 2009 12:50 pm

Re: Cracked Forged Iron Head

Postby grux » Mon Apr 15, 2013 6:10 pm

lagpressure wrote:http://www.ebay.com/itm/LH-VINTAGE-WILSON-STAFF-9-Iron-1965-ALL-ORIGINAL-/150440168970?pt=LH_DefaultDomain_0&hash=item2306eece0a

Here is a 65 Dyna 9 iron you could bend into an 8 iron easy enough... at least in the meantime till you find the 58 LH. The LH ones are out there.. just have to be patient. Check

http://ironfinder.com

from time to time... although I didn't see one on there today...


Thanks Lag. I will buy that 9 iron and keep my eye out for and 8 iron.
grux
 
Posts: 74
Joined: Tue Mar 08, 2011 8:34 am

Re: Cracked Forged Iron Head

Postby jrich99 » Tue Apr 16, 2013 3:59 pm

There are places that will fix them, but not sure if they feel the same afterwords. Worth a try though.
User avatar
jrich99
 
Posts: 627
Joined: Wed Feb 23, 2011 7:34 pm

Re: Cracked Forged Iron Head

Postby grux » Tue Apr 16, 2013 5:14 pm

jrich99 wrote:There are places that will fix them, but not sure if they feel the same afterwords. Worth a try though.

Yeah, I contacted Jim at the iron factory and he can weld the club. However, the loft and lie can never be changed.
grux
 
Posts: 74
Joined: Tue Mar 08, 2011 8:34 am


Return to Equipment

Who is online

Users browsing this forum: No registered users and 3 guests