hogan shaft id

hogan shaft id

Postby IanB » Thu Sep 03, 2015 4:24 pm

Does anyone know about hogan shafts with black silver and blue bands lettered R from a 62 power thrust ?
Is that regular or stiff?
There is DO and there is DO NOT. There is no TRY.
IanB
 
Posts: 256
Joined: Mon Dec 23, 2013 11:57 am

Re: hogan shaft id

Postby IanB » Thu Sep 03, 2015 4:28 pm

pic of what I'm talking about
Attachments
Screen Shot 2015-09-04 at 1.27.10 AM.png
Screen Shot 2015-09-04 at 1.27.10 AM.png (17.5 KiB) Viewed 2458 times
There is DO and there is DO NOT. There is no TRY.
IanB
 
Posts: 256
Joined: Mon Dec 23, 2013 11:57 am

Re: hogan shaft id

Postby Mashie72 » Thu Sep 03, 2015 4:45 pm

Hey Ian,

I just happen to have a set of those too with the same shaft label.

I'll put them on my frequency analyzer this weekend and let you know. Or maybe someone already has the answer
"The secret is on the deck"
User avatar
Mashie72
 
Posts: 992
Joined: Wed Jun 24, 2009 5:42 am

Re: hogan shaft id

Postby lagpressure » Thu Sep 03, 2015 11:25 pm

I believe on those early Hogan shafts the 'R" stood for Rigid.

They certainly are not "regular 'which usually are not stiff. I suppose they switched later on
to avoid confusion with "regular".
User avatar
lagpressure
Site Admin
 
Posts: 8146
Joined: Thu Jun 04, 2009 12:50 pm

Re: hogan shaft id

Postby 20 Mule Team » Fri Sep 04, 2015 2:34 am

I had these shafts in my 67 PC7's. I'd say they are comparable to a DG S300, both in weight (cut weights around 117-118 grams, and that's based on a 38.5" 2 iron) and flex. Good shafts, imo.
20 Mule Team
 
Posts: 108
Joined: Sat May 03, 2014 9:05 am

Re: hogan shaft id

Postby Mashie72 » Mon Sep 07, 2015 9:27 am

This what I have Ian all with a 4-iron in terms of CPM

'64 Hogan PTIII 290.13 CPM Same Label as yours
'67 Percussion 289.99 CPM Same Label as yours
'89 Edge 291.03 CPM Apex 4 (Gift from friend)

CF4000 301.05 CPM Pro-Pel #1
CF4000 314.20 CPM FM 7.0
"The secret is on the deck"
User avatar
Mashie72
 
Posts: 992
Joined: Wed Jun 24, 2009 5:42 am

Re: hogan shaft id

Postby IanB » Wed Sep 09, 2015 12:20 pm

awesome thanks guys great info
There is DO and there is DO NOT. There is no TRY.
IanB
 
Posts: 256
Joined: Mon Dec 23, 2013 11:57 am


Return to The Persimmon Age (Steel)

Who is online

Users browsing this forum: No registered users and 2 guests

cron